language

产品管理

全部
产品管理

Home

HDPE silicon core pipe

HDPE silicon core pipe is a new type of composite pipe with silicon colloid solid lubricant on the inner wall, which is called silicon pipe for short. With good sealing performance, chemical corrosion resistance and low engineering cost, it is widely used in optical cable communication network systems such as highways and railways. It is extruded and compounded by three plastic extruders at the same time. The main raw material is high-density polyethylene, and the core layer is silicon colloid, a solid lubricant with the lowest friction coefficient. It is widely used in optical cable communication network system. Main advantages of HDPE silicon core pipe:

E-mail: lcsy365@126.com

Phone/WhatsApp: +86-13807214678

Get A Quote

Online Inquiry

Product Description

Hubei HDPE silicon core pipe Liangcheng silicon core pipe silicon core pipe project

HDPE silicon core pipe

A. The inner wall is solid lubricant with small sliding resistance, which can blow the optical cable to a distance of 2000 meters without breaking; Moreover, the optical cable can be repeatedly extracted and blown, and the self-lubricating characteristics of the inner wall have no change;

B. High mechanical strength, good resistance to high and low temperature, good resistance to chemical corrosion, long service life, no need for additional protection, one HDPL silicon core tube can complete all protection tasks of optical cable.

C. It has good flexibility and can adapt to the slope changes of the terrain, so it can save a lot of investment. Another advantage of good flexibility is that it has strong resistance to external forces, such as earthquakes.

D. The length of the pipeline is 2000 meters, and 90% of the manhole (hand hole) can be dug less than other optical fiber protective casing, which can save up to 50% of the total project cost, which is the biggest competitive advantage of this product.

Size and Specification of Silicon Core Tube:

Size and specification of silicon core tube
Outer wall D	Inner wall D	Length (m)
34	28	2800
40	33	2000
46	38	1500

Silicon Core Tube Price | Silicon Core Tube Technical Index:

Test Items	Technical Indicators
1. Appearance quality	The inner and outer wall entities shall be flat, uniform and smooth, and free from defects caused by pits and impurities; The appearance color shall be uniform, without decomposition discoloration lines and spots; The section shall be free of bubbles and cracks; The inner wall of the silicon core is tightly fused and free of detachment; The product identification on the outer wall is complete and clear.
2. Ring stiffness, KN/m2	≥40
3. Flat test	When the deformation of the outer diameter is 40% of the original outer diameter, the load shall be unloaded immediately, and the sample shall not break or delaminate.
4. Recovery rate	When the deformation of the outer diameter is 30% of the original outer diameter under vertical pressure, the load shall be unloaded immediately, and the sample shall not crack or delaminate, and the outer diameter can recover to more than 90% of the original one.
5. Tensile strength, Mpa	≥21
6. Elongation at break,%	≥350
7. Maximum traction load, N	≥8000
8. Drop hammer impact test	The temperature is 0 ℃, the height is 2m, and the impact is 10 times with a 2Kg heavy hammer, and there should be no cracking at least 9 times.
9. Outer wall hardness, HD	≥59
10. Hydrostatic seal test	Under the condition of temperature 20 ℃ and pressure 50 Kpa, keep it for 24 hours, and the connector and pipe plug of the sample shall be free of leakage.
11. Longitudinal retraction rate,%	≤3
12. Cold bending radius, mm	≤400
13. Friction coefficient of inner wall	Static (plate method)	≤0.25
	Dynamic (drum method)	≤0.15
14. Power frequency breakdown strength, KV/mm	≥15
15. Chemical corrosion resistance	Immerse the sample in 5% NaCL, 40% H2SO4 and 40% NaOH solution for 24 hours respectively, and there is no obvious corrosion.
16. Crack strength, MPa	≥2.0