Communication silicon core tube

Silicon core pipe is a new type of composite pipe with silicon colloid solid lubricant on the inner wall. It has good sealing performance, chemical corrosion resistance and low engineering cost. It is widely used in optical cable communication network systems such as highways and railways. HDPE silicon core pipe is a new type of composite pipe with silicon colloid solid lubricant on the inner wall, which is called silicon pipe for short. It is extruded and compounded by three plastic extruders at the same time. The main raw material is high-density polyethylene, and the core layer is silicon colloid, a solid lubricant with the lowest friction coefficient. It is widely used in optical cable communication network system.

HDPE underground pipe jacking

Polyethylene (PE) pipe plays an important role in underground pipe jacking due to its excellent mechanical properties, electrical properties, impact resistance and environmental protection properties, and its use is increasing. The HDPE underground jacking pipe produced by Liangcheng is produced by the advanced polyethylene pipe extrusion production line. Because of its unique screen basket head design, advanced barrier screw and IKV forced extrusion system, etc., it ensures the full melting and plasticization of raw materials, and ensures that the polyethylene pipe has excellent fast and slow cracking resistance in use.

COD corrugated bundle pipe

COD stands for Corrugated Optical Duct, which is a whole composed of multiple internal cable pipes and outer pipes. COD and traditional general PE pipes assemble the inner pipes (3 to 5) that have been manufactured into the outer pipes through the reproduction process.

HDPE micro tube bundle

Microtube is a kind of soft plastic tube with small size and light weight. Its maximum outer diameter should not be greater than 16mm. Microtube must be round.

MPP single-wall corrugated pipe

Mpp single-wall corrugated pipe is a new type of structural plastic pipe made of polypropylene as the main raw material, using composite reinforced modified special formula and processing technology. it has a series of advantages such as novel structure, high strength, good temperature resistance, simple construction and cost saving.  

PVC electrical sleeve

It is extruded with PVC as the main raw material, together with toughening agent, anti-aging agent and other auxiliary additives. It is mainly used for indoor wiring, wall wiring, underground wiring and other communication lines. It is a good line selection material. PVC electrical sleeve is made of inert materials. Besides a small amount of strong oxidant, it is resistant to various chemicals and is not easy to breed bacteria. Its performance is better than that of steel pipe and cast iron pipe.

PVC-C high-voltage power bushing

Buried chlorinated polyvinyl chloride high-voltage power cable sleeve is a new type of pipe material developed in recent years. It is mainly used for laying and protecting street lamp cables. Its good physical and mechanical properties fully meet the requirements of the power user for the product, with high strength, good impact resistance, light weight, convenient installation, non-pollution, corrosion resistance, aging resistance, long service life, convenient construction and installation, and short construction period. The product adopts the connection method of flared socket, which is flexible and convenient. It has been widely used in domestic street lamp power system.

Silicon core pipe fittings

Designed according to JT/T496-2004 and Q/KL012-2005, it is used for fastening and sealing cables in silicon core pipes.

PE communication pipe rack

PE communication sub-pipes are often placed together in the main pipe during use. In order to prevent PE communication sub-pipes from being seriously worn and intertwined in the main pipe, the use of the corresponding PE communication sub-pipe rack can reduce the friction of the sub-pipes in the main pipe, orderly discharge, and facilitate construction and maintenance.

PPR pipe

PPR pipe is a new generation of environmental protection products. In addition to the advantages of general plastic pipe quality, corrosion resistance, non-scaling and long service life, PPR pipe also has good sanitary performance, good heat resistance, low thermal conductivity, thermal insulation and energy conservation. It adopts hot-melt connection, easy installation, reliable connection, and recyclable materials. It is a veritable green environmental protection building material.

2022-12-08

Warmly celebrate the opening of the official website of Hubei Liangcheng Technology Co., Ltd!

Jingzhou Liangcheng Technology Co., Ltd. is a national high-tech enterprise specializing in plastic pipe design, production, marketing and installation services. Located at No. 6, Tieniu Road, Yanjiang Industrial Park, Jiangling County, Jingzhou City, Hubei Province, with a registered capital of 60 million yuan and an area of 70000 square meters, it has the comprehensive capacity to produce 12000 tons of various types of plastic and composite pipes annually. The main products are: HDPE silicon core pipe, high-performance bunched microtube, PE sub-pipe, perforated plum pipe, double-wall corrugated pipe, plastic alloy composite communication pipe, MPP power pipe, PE water supply pipe, gas pipe, steel-plastic composite pipe, etc. The products are widely used in communication, power, urban underground pipe gallery, water supply and drainage, farmland water-saving irrigation and other fields. It has passed ISO9001 quality system certification, ISO14001 environmental system certification and OHSAS18001 occupational health and safety management system certification.

Learn More >

2024-07-26

Enhancing Communication in Plastic Pipe Machinery with Porous Communication Power Tube

In the manufacturing and processing machinery industry, specifically in the realm of plastic pipe machinery, communication is key to ensuring smooth operations and optimal performance. One groundbreaking technology that has been revolutionizing communication in this sector is the porous communication power tube. The porous communication power tube is a cutting-edge solution that allows for enhance

Learn More >

2024-07-25

Exploring the Versatility of Porous Communication Power Tubes

**Introduction** Porous communication power tubes are a crucial component in the realm of manufacturing and processing machinery, particularly in the plastic processing machinery sector. These tubes play a vital role in ensuring efficient communication and power distribution within various systems, making them indispensable in today's industrial landscape. **The Evolution of Porous Communication P

Learn More >

2024-07-24

Enhancing Automotive Performance with Traffic Engineering Cluster Tubes

Traffic engineering cluster tubes are essential components in the automotive industry, particularly in the production of rubber hoses for lateral parts of vehicles. These tubes are designed to enhance the performance and efficiency of the hoses, ultimately improving the overall functionality of the vehicle. One key benefit of traffic engineering cluster tubes is their ability to optimize the flow

Learn More >